I had a T-2 rack, but the 6 foot version. Don't get one that short unless you're willing to sacrifice some lateral stability and remove the pull-up bar. It was fine otherwise, but I only have it as a secondary rack for a while since I bought it used and it had the weight storage extension and the lat pull-down/low row.

They make your farmers into a frame. However, they are very tight, so getting them into position and turning your farmers into a frame requires the use of a mallet at times. They are sturdy, and since I got the farmers and these as a package, I have no issues with the value. However, because they can be a pain to put on, I don't use them often.

Great top-load farmers. Do not buy front load farmers because you'll find every excuse to avoid using them. The handles are adjustable, but that's a feature I have never used. I would prefer to just them have welded in place as I find having pins there is just annoying. However, they're sturdy, and I've been using them for 6 years now without issue.

Works great as plate storage. I like that all the weight horns are spaced far enough away from each other that bumper plates can fit on any of the three levels. I actually have two of these (bought a new one and then found a used one like 2 weeks later), so one is used on my deadlift platform to store lots of iron plates and one is used to store my bumper plates. For the iron plates, the powder coating gets scratched off very quickly, but for bumpers the coating is great. I think this would better with chrome coated weight horns. Also, if your floor is not smooth nor completely rigid (e.g., concrete vs horse stall mats) and you have an appreciable amount of weight on it, the wheels are basically useless.

I had this rack for several years before selling it to make space for my custom 8-post rack from Rep. The RML-390F was sturdy enough for everything I threw at it. The power coating was high quality and I didn't notice any chipping. However, depending on the flooring you have, it may slide around a bit when reracking heavy weights. Additionally, it was just a bit too short to overhead press in for my height (5'11"). I also have to write numbers on the uprights for the holes with sharpie. They could definitely add numbering, even if it's every 5 holes like Rep does with the PR-4000. Additionally, the flat foot design does limit you from adding on later from Rogue's catalogue of rack attachments that require bottom cross-members. If you are looking for just a power rack and you know you won't need to use it for functional trainer capability or don't want to add on weight storage, this rack is great. Otherwise, I'd for a "bolt down" rack (who really needs to bolt those down anyways).

These are perfectly adequate iron plates. They fit on every bar I own without issue. I did buy them during the height of iron plate prices, so the value may be skewed a bit. However, as I did get a 25% off coupon to buy these from Titan during that time, they were the least expensive during that time. Checking the prices now, they seem to be priced higher than I would have expected at around $2/lb. The build quality is fine, especially for the price. The coating doesn't chip off that easily, but even while new, there were nicks and burs in the plates already. If you only care about weight being weight and you can't find anything secondhand, these will serve you well (especially if they are a "secondary" set of plates), otherwise I'd just get something like the Strength Co plates for ~$20 more per set of 45s.

I own both a 10" (~70lbs) and 12" (~80lbs) dumbbell without end caps. The weight pegs do not have threading to add end caps later, so because of this, my weight pegs are slightly undersized, similar to pretty much all other strongman equipment. These are incredibly beefy and have beat up plywood flooring before incurring any issues themselves. I also like the powder coat as it's grippy, so I don't need any chalk to use these. The handle on the 12" is larger than the 10", but the 12" will fit my 25lbs plates.

It's a hefty piece for a fairly hefty price. I would only recommend this if you don't have floor space but can dedicate an upright to it. Removing from the rack and storing it elsewhere is annoying enough that you'll want to sell it like I did. It's not light, so it can be difficult even for those who are strong as there isn't really an elegant way to attach it to the rack. The strength curve is fine, but you'll easily max out the leg extension portion if you can squat 315 or more.